1-37
TCP/IP Settings (only Admin.)
Item
Specifications / Comments
Setting Method
yes (Control panel/Browser)
TCP/IP Setting
IP Address
yes
Subnet Mask
yes
Gateway Address
yes (max. 2 addresses)
DNS Server Address
yes (max. 2 addresses)
・
DNS Suffix
yes (50 characters)
DHCP Setting (ON/OFF)
yes, renew command is supported
Network Environment Initialize
yes (Browser)
MAC Address Display
yes (Control panel)
PING
yes (Control panel)
SMB Setting
NetBIOS
yes
Workgroup
yes
WINS
yes (max. 2 addresses)
HTTP Port No. Change
yes
Client Port No. Change
yes
InfoMonitor Port No. Change
yes
Scan to Print Monitor
yes
Network Setting Code (only Admin.)
Item
Specifications / Comments
Read/Write Code
yes, 4 digits
Read Only Code
yes, 4 digits
Backdoor Password
yes, embedded 7 digits
SMPT/POP Settings (only Admin.)
Item
Specifications / Comments
Setting Method
Browser
Machine E-mail Address
yes
Machine Name
yes
Reply-to Address
yes
SMTP Server Setting
・
Mail Server Address/Domain Name
50 characters
・
Substitute Tx Mail Server
no
・
SMTP Port Number
1-65535
・
Main Retrieve before Tx
yes
・
SMTP Authentication
yes, LOGIN / PLAIN / CRAM-MD5
- SMTP Auth Account
yes
- SMTP Auth Password
yes
POP3 Server Setting
・
POP Server Address/Domain Name
yes
・
E-mail Account
yes
・
Password
yes
・
POP3 Port Number
yes
・
APOP Authentication
yes
・
Auto Rx Interval
5sec. - 99 hrs 59min. 59sec, 0 (Stop)
SMTP Rx Setting
・
Rx Domain Name
50 characters
・
Rx Port Number
0-65535
・
E-mail Address/Domain Name/IP Address to
allow Rx
50 characters x 5
Содержание F-525
