![background image](http://html1.mh-extra.com/html/muratec/f-525/f-525_field-engineering-manual_1857397162.webp)
3-78
3.5 All RAM Clear
The All RAM Clear setting will erase all user-programmed information, all documents in memory, and
reset the memory switches and unique switches to factory defaults.
This feature may also be used to try and clear a machine malfunction or lock up. If possible, when the
All RAM Clear is used to reset a malfunction or lock up, it is advisable to print the machine settings,
one-touch and speed dial listings to help in reprogramming this information.
Note:
The All RAM Clear does not clear the machine parameters, life monitor and consumable order
sheet. If you need to clear them, see “Clearing the machine parameters” on page 3-4, “Clear
Life Monitor”on page 3-132 or “Clear consumable order sheet” on page 3-131.
1. To perform an All RAM Clear, from standby, press <Setting>, <*>, <0>, <3>.
2. Press [Yes].
Note:
To finish the operation without performing RAM clear, press [No].
3.6 Clear Programmed Data / User Settings
User programmed information such as address book entries, date, time, Transmit Terminal Identifier
(TTI), Subscriber ID, etc., are stored in the unit’s Random Access Memory (RAM). A battery back up
holds this information, when the power is lost.
This function does not clear the machine parameters, memory switches and unique switches.
Therefore, this setting is useful to reset the user-programmed information but leave specific
parameters and switches configured for a particular telephone system, etc.
To reset only each switch, see page 3-4, 3-50 and 3-80.
Note:
If desired, the All RAM Clear setting can be used to erase all users programmed information, all
documents in memory, and reset the memory switches and unique switches to factory defaults.
For information on the All RAM Clear setting, see the next page.
1. To clear programmed data and user settings, from standby, press <Setting>, <*>, <0>, <2>
.
2. Press [Enter].
Note:
To finish the operation without performing initialization, press [Cancel].
Содержание F-525
