manualshive.com logo in svg

Muratec F-525, Руководство по полевой инженерии

Поделиться
Скачать
Muratec F-525 Скачать руководство пользователя страница 273

4-7

4.7 Cleaning the Unit

Use a mild cleaning solution on a lint-free cloth to wipe the machine’s cover, handset and paper cassette 
tray. Never spray cleaner directly onto the fax machine as the spray could damage components inside the 
fax.

4.7.1 Cleaning the Document glass, ADF glass and Sheet Document 

Press

1. Open the platen cover.

2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol.

Important:

 Make sure the cloth doesn’t have any rough areas. Otherwise, it could scratch the glass 

surface of the FBS.

3. Using the cloth, gently clean the Document glass and the ADF glass.

Document glass

ADF glass

Document pad

 

ADF glass

MFX-2050/1450   

 

 

 

 

F-565/525

4.7.2 Cleaning the drum chare wire and LED print head

If there are streaks on your print, the drum charge wire and LED print head may require cleaning.

1. Open the front cover.

2. Gently pull the cleaning rod to and fro fully to the end several times.

   

 Pull the blue rod toward

    you,making sure it fully

    extends.

   

 Return the rod to its

    original position.

Instruction

A

1

2

3. Close the front cover.

4.8 Transmit Error

Symptom: Check message prints after attempting transmission.
Suggested corrective action:

1. Reference the error code on the check massage or the journal to the error code list contained in 

this section.

Содержание F-525
































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды