Muratec F-525 Скачать руководство пользователя страница 203

Страница: 203 / 383

3-119

5. Press <Reset> to exit the test mode.

3.13.7 RTC(real time clock) Test

This test mode is not applicable to field service of this machine.

3.13.8 Page memory check

When the letters are not printed correctly, perform this test.

1. Press <Setting>, <*>, <1>, <1>, then select [Page Memory check].

2. Select the desired checking area.

3. The machine starts checking and the result (OK/NG) will be shown in the display.

If NG is shown, perform the DRAM clear (page 3-118), and then go back to step 1.

4. Press <Setting> to exit the test mode.

Содержание F-525
































































































































































































































































































































































































Результаты поиска

Содержание F-525

Отзывы:

Muratec F-525, Руководство по полевой инженерии, Страница: 203 / 383

Результаты поиска

Содержание F-525

Отзывы: