Muratec F-525 Скачать руководство пользователя страница 216

Страница: 216 / 383

3-132

3.18 Clear Life Monitor

The life monitor keeps a count of the pages scanned, printed, and transmitted, along with the drum

replacement count and total pages printed on the current drum. This mode clears these counters.

1. Press <Setting>, <*>, <1>, <7>

2. Press [Yes]. The counters will be reset.

Note:

To finish the operation without performing initialization, press [No].

3.19 Clear Optional Data

This mode clears all data and all activity journals for Printer controller and second phone line.

1. Press <Setting>, <*>, <1>, <8>.

2. Press [Yes]. The optional data will be reset.

Note:

To finish the operation without performing initialization, press [No].

Содержание F-525
































































































































































































































































































































































































Результаты поиска

Содержание F-525

Отзывы:

Muratec F-525, Руководство по полевой инженерии, Страница: 216 / 383

Результаты поиска

Содержание F-525

Отзывы: