manualshive.com logo in svg

Muratec F-525, Руководство по полевой инженерии, Страница: 235 / 383

Поделиться
Скачать
Muratec F-525 Скачать руководство пользователя страница 235

3-151

First page of the detailed report

 

Note:

 Some device may not be available on this machine.

Paper Cassette Status:

  Paper Supply Device: The device names that supply paper.

  Paper Release Device: The device names that stack paper.

Items

Detail

Present setting

Whether the device is available or not, if available the supplied paper size or 

“Paper out” is printed.

Print Pages (Every I/C)

The printed pages per device. The value in the parenthesis shows the pag-

es printed with the current drum. (I/C = Imaging Cartridge)

JAM Pages (Every I/C)

The jammed pages per device. The value in the parenthesis shows the 

pages printed with the current drum. (I/C = Imaging Cartridge)

Media

The media supplied to the device.

Printer Jam Info: The information of pages printed normally and jammed per paper supply devices.

Life Counter:

Items

Detail

# of pages printed after replacing toner The number of printed pages that are printed using the pres-

ent toner cartridge.

# of pages printer after toner warning

The number of printed pages after “The toner is low” warning 

is displayed.

Toner Replaced Count

The number of times toner cartridge is replaced.

Drum Rotation Time

The number of times drum cartridge is replaced.

# of drum replacement

The number of drum cartridge replaced times.

Drum Life Time

The drum cartridge rotating seconds.

Custom Size (3 type)

The registered custom size paper.

Order Sheet Setting

The setting of consumable order sheet (Off, Print, Fax, e-mail).

Dealer Service Report

The setting of service report (Off, Fax, e-mail).

Содержание F-525
































































































































































































































































































































































































Отзывы:

Нет отзывов