Muratec F-525, Руководство по полевой инженерии, Страница: 367 / 383

5-77
5.3.4 Zoom adjustment
FBS zoom adjustment (Vertical)
L R
2003-01
NO.20031021
1.40
1.25
1.00
0.75
0.55
0.40
0.35
0.30
0.25
0.20
0.15
0.10
1.40
1.25
1.00
0.75
0.55
0.40
0.35
0.30
0.25
0.20
0.15
0.10
A
Note:
This adjustment must be made after the adjustments of printer registration (top and side) of the 1st cassette
have been made.
The difference should be within ± 1.0% of the actual length of A on the test chart No. 2003-01.
Adjust so that the following specifications are satisfied with the length of A on the test chart
No.2003-01.
Zoom ratio Standard Adjustment Tool Setting Range
100 % ± 1.0 % Machine parameter:017
– 1.5 to 1.5 %
(0.1 % step)
Adjustment procedure
1. Load legal (for USA version) or A4 (for GBR version) size paper to the first cassette.
2. Place the Muratec Test Chart No. 2003-01 on the FBS.
3. Make two copies on paper in the 1st cassette with 100 % magnification.
4. Measure the length of A on the second copy to find the difference.
If length A falls outside the specified range, perform the following steps to make the adjustment.
5. Enter Machine Parameter mode. (Press <Setting>, <*>, <0>, <0>)
6. Adjust so that the setting of Machine Parameter 017 meets the specification.
If length A is shorter than the standard, increase value.
If length A is longer than the standard, decrease value.