manualshive.com logo in svg

Muratec F-525, Руководство по полевой инженерии, Страница: 231 / 383

Поделиться
Скачать
Muratec F-525 Скачать руководство пользователя страница 231

3-147

26-1. You can set the interval for service report auto transmission from 1 to 12 months.

The default setting is 3 months.  Enter the desired number (01 to 12) using the cursor key or the 

numeric keypad, and press [Enter].

26-2. Enter the day and time in 24-hour format when to send the report, and press [Enter].

  For instance, to send the report every 5th day of the month at 2 pm, press,

 

0, 5, 0, 2, 0, 0.

27. Press <Reset> to go back to the stand by mode. 

3.28.2 Clear service report

To clear the information of service report:

1. Press <Setting>, <*>, <4>, <2>.

2. Press [Delete].

3. To clear the information of service report setting, press [Yes]. 

To finish the operation without clearing, press [No].

Содержание F-525
































































































































































































































































































































































































Отзывы:

Нет отзывов