manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 99 / 142

Поделиться
Скачать
Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 99

Appendixes

99

MTPSR1-202ST

Appendix C - Regulatory Compliance Information

Class B Statement

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection
against harmful interference in a residential installation.  This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.  However, there is no guarantee that
interference will not occur in a particular installation.  If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

·

Reorient or relocate the receiving antenna.

·

Increase the separation between the equipment and receiver.

·

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

·

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)

This device may not cause harmful interference.

(2)

This device must accept any interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Industry Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.

Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel
brouilleur du Canada.

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов