Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 142

Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 90

ProxyServer User Guide

90

MTPSR1-202ST

Service

If your tech support specialist decides that service is required, your ProxyServer may be sent (freight
prepaid) to our factory. Return shipping charges will be paid by Multi-Tech Systems.

Include the following with your ProxyServer:

•

a description of the problem.

•

return billing and return shipping addresses.

•

contact name and phone number.

•

check or purchase order number for payment if the ProxyServer is out of warranty. (Check
with your technical support specialist for the standard repair charge for your ProxyServer).

•

if possible, note the name of the technical support specialist with whom you spoke.

If you need to inquire about the status of the returned product, be prepared to provide the serial
number of the product sent.

Send your ProxyServer to this address:

MULTI-TECH SYSTEMS, INC.

2205 WOODALE DRIVE

MOUNDS VIEW, MINNESOTA 55112

ATTN: SERVICE OR REPAIRS

You should also check with the supplier of your ProxyServer on the availability of local service and/or
loaner units in your area.

«
...
88
89
90
91
92
...
»

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов