manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 12 / 142

Поделиться
Скачать
Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 12

ProxyServer User Guide

12

MTPSR1-202ST

Introduction

This chapter describes how to unpack and cable your ProxyServer. The unpacking section describes
the contents of the shipping box and shows how the ProxyServer is packaged. The installation
procedure describes each cable connection and shows where that cable is connected to the
ProxyServer.

Unpacking

The shipping box contains the ProxyServer, external power supply, an RJ-45 to phone jack cable, an
RJ-45 to DB-9 Command port cable, your Quick Start Guide, and the ProxyServer CD with the
ProxyServer Software and ProxyServer User Guide (in Adobe Acrobat

TM

 format). Inspect the

contents for signs of any shipping damage. If damage is observed, do not power up the unit, contact
Multi-Tech’s Technical Support for advice (refer to Chapter 9). If no damage is observed, place the
ProxyServer in its final location and perform the cabling procedure.

Save the shipping box in case reshipment is necessary.

MADE IN U.S.A

MADE IN U.S.A

www

.multitech.com

Figure 2-1. Unpacking

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов