Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 70

Страница: 70 / 142

ProxyServer User Guide

MTPSR1-202ST

When the Installing Multi-Tech WINMCSI window is displayed, click the Install button to begin
the installation. Click Abort at any time to cancel the installation

When the installation is complete, the WinMCSI Installation window is displayed.

Click Modify INI files now to have WINMCSI automatically make changes to your SYSTEM.INI
and WIN.INI files.

Click the Save changes to file button to have WINMCSI make a copy of the changes to be
made and store them in a file.

Note: Because you must make the changes before you can run WINMCSI, it is recommended
that you choose Modify INI files now.

A screen is displayed telling you that your installation is complete and where your WIN.INI and
SYSTEM.INI files are backed up.

10. The following message is displayed:

Click Yes or No, as appropriate.

Содержание ProxyServer MTPSR1-202ST















































































































































Результаты поиска

Содержание ProxyServer MTPSR1-202ST

Отзывы:

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 70 / 142

Результаты поиска

Содержание ProxyServer MTPSR1-202ST

Отзывы: