manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 110 / 142

Поделиться
Скачать
Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 110

ProxyServer User Guide

110

MTPSR1-202ST

&E7

When XON/XOFF pacing is active, the ProxyServer responds to the XON/
XOFF characters and passes them through the communications link to the
remote device, thereby pacing the remote terminal adapter as well.

&E12

Disables pacing

&E13

Enables pacing.

Command:

#Xn

Function:

Send Single/Multiple Xoff Characters

Values:

n = 0 or 1

Default:

#X0

Description:

The #X command allows the ProxyServer to send either a single or multiple Xoff
characters to exert flow control to the terminal.  The #X0 command (factory default
setting) causes one Xoff to be sent until the ProxyServer's buffer reaches the Xon
level.  The #X1 command causes an Xoff to be sent for every character received
after the ProxyServer reaches its buffer full level.

#X0

One Xoff character sent until the buffer reaches the Xon level (default)

#X1

Multiple Xoff characters sent for every character received after buffer
reaches the full level.

Command:

&Fn

Function:

Load Quick Setup Profile

Values:

n = 0–4

Default:

&F0

Description:

For quick setup, the ProxyServer includes six Quick Setup Profiles, each of which

contains configuration parameters for a specific type of port operation. You can load
a Quick Setup Profile into active memory by using the command &Fn, in which n is
the number of the profile you wish to load. You may also customize the profile and
store it, using the &W command, so that it loads automatically on power- up or reset.
These profiles are stored in permanent memory and are not user-configurable.

&F0

Profile 0 — Modem-like operation (default)

&F1

Profile 1 — V.110 async operation—not presently supported.

&F2

Profile 2 — V.120 async operation—not presently supported.

&F3

Profile 3 — X.75 async operation—not presently supported.

&F4

Profile 4 — MLPPP async operation - not supported

&F6

Profile 6 — CLEAR [default  =  !Z=11, S52=0, and &M0 (asynchronous)]

Command:

&Mn

Function:

Asynchronous Mode

Values:

n = 0 or 1

Default:

&M0 (Asynchronous)

Description:

Use the &Mn command to set the ProxyServer for synchronous or asynchronous
transmission. Note that synchronous transmission is not presently supported, and
this command is included for future use only.

&M0

Asynchronous mode transmission.

&M1

Synchronous mode transmission—not presently supported.

Command:

&Rn

Function:

CTS Control

Values:

n = 0, 1, or 2

Default:

&R1 (CTS forced high)

Description:

The &Rn command lets you control the state of the CTS (Clear to Send) signal on
the RS232E/V.24 interface. Normally the CTS signal follows the state of the RTS
signal when the ProxyServer is online.

&R0

CTS acts normally; that is, it follows RTS.

&R1

CTS is forced high, but still provides online flow control.

&R2

CTS is forced high, but it drops on disconnect for the period of time set by
S10. CTS still provides flow control when the ProxyServer is online.

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов