Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 142

Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 23

Chapter 3 - Software Loading and Configuration

23

MTPSR1-202ST

22. The Checking ProxyServer dialog box is displayed.

The Setup utility is "Ready to Download wizard Setup”. Click OK to proceed.

23. The Writing Setup dialog box is displayed as the setup configuration is written to the

ProxyServer.

24. During the reboot, the Fail LED will be ON. Wait for the Fail LED to go OFF (approximately two

minutes).

25. You are returned to the Multi-Tech Installation CD screen where you now have the option to

install (on your PC’s hard drive) Acrobat Reader (by clicking the Acrobat icon) and/or the User
Guide (by clicking the Install Manuals icon, selecting MTPSR1-202ST, and clicking OK). The files
will install at C:\Program Files\Multi-Tech Systems, Inc.\PSR1-202\Documentation unless you
browse and select an alternate directory for installation.

At this time your ProxyServer is operational. Verify that each client PC has an IP stack loaded,
workstation IP address assigned, gateway pointed to the ProxyServer, and the DNS name(s)
supplied by the ISP are entered. Refer to Chapter 5 for Client Setup information.

«
...
21
22
23
24
25
...
»

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов