manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 44 / 142

Поделиться
Скачать
Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 44

ProxyServer User Guide

44

MTPSR1-202ST

These local  addresses are then mapped to the global address by function.  The FTP server was
assigned an IP address of 192.168.11.20 with a TCP and UDP protocol and a port number of 20 and
21.  The Mapping Details  [Local] group in the Virtual Server Mappings dialog contains the FTP
server local mapping information.  When the FTP server mapping information is entered, the Web
server can be mapped to the global address by entering the IP address 192.168.11.30 in the Local IP
Address field of the Mapping Details [Local] group with its protocol and port information.  Then the
mail server, and if a MultiVOIP is used in the local network - its mapping information, can be added to
the local mapping group.

The Virtual Server Setup dialog displays all the local mapping information.

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов