manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, Руководство пользователя, Страница: 2 / 142

Поделиться
Скачать
Multitech ProxyServer MTPSR1-202ST Скачать руководство пользователя страница 2

User Guide

S0000005 Revision A

ProxyServer 200-Series (Model MTPSR1-202ST)

This publication may not be reproduced, in whole or in part, without prior expressed written permission from
Multi-Tech Systems, Inc. All rights reserved.

Copyright © 1999, by Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes.

Record of Revisions

Revision

Description

       A

Manual released.  All pages at revision A.

(10/22/99)

Patents

This Product is covered by one or more of the following U.S. Patent Numbers: 5.301.274; 5.309.562;
5.355.365; 5.355.653; 5.452.289; 5.453.986. Other Patents Pending.

TRADEMARK

The Multi-Tech logo and ProxyServer are registered trademarks or trademarks of Multi-Tech Systems, Inc.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
Microsoft, Windows, and Windows NT are registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

(612) 785-3500 or (800) 328-9717

Fax 612-785-9874

Tech Support (800) 972-2439

BBS (612) 785-3702 or (800) 392-2432

Internet Address: 

http://www.multitech.com

Содержание ProxyServer MTPSR1-202ST















































































































































Отзывы:

Нет отзывов