MTU 20V4000C55, Руководство по эксплуатации

Страница: 44 / 226

6 Maintenance
6.1 Maintenance task reference table [QL1]
The maintenance tasks and intervals for this product are defined in the Maintenance Schedule. The Mainte-
nance Schedule is a stand-alone publication.
The task numbers in this table provide reference to the maintenance tasks specified in the Maintenance
Schedule.
Task
Option
Maintenance tasks
W0500 Check engine oil level. (→ Page 120)
W0501 Visually inspect engine for leaks and general condition. (→ Page 39)
W0505 Check relief bores of coolant pump(s). (→ Page 139), (→ Page 148)
W0506 Check engine for abnormal running noises, exhaust color
and vibrations. (→ Page 46)
W0507 Drain water and contaminants from fuel prefilter. (→ Page 183)
W0508 Check reading on differential pressure gage of fuel prefilter. (→ Page 183), (→ Page 171)
W0800 Check emissions label for presence, readability and content. (→ Page 111)
W1001 Replace fuel filter or fuel filter element. (→ Page 108)
W1003 Check belt condition and tension, replace as necessary. (→ Page 92)
W1006 Replace fuel injection valves/injectors. (→ Page 101)
W1008 X Replace engine oil filter when changing engine oil, or when
the interval (years) is reached, at the latest.
–
W1009 Measure thickness of oil residue layer, clean out and replace
filter sleeve, together with every engine oil change, at the
latest. (→ Page 129)
W1011 Perform endoscopic examination. (→ Page 84)
W1055 Replace oil separator. (→ Page 88)
W1207 Check valve clearance, adjust as necessary. ATTENTION!
First adjustment after 1,000 operating hours on a new en-
gine and after 1,000 operating hours following each over-
haul of the cylinder heads. (→ Page 96)
W1296 X Replace valve. (→ Page 140)
W1463 Check general condition of engine mounting (visual inspec-
tion). –
W1481 Replace intermediate fuel filter or its filter element. (→ Page 109)
W1525 Replace sensor. (→ Page 164)
W1526 Replace sensor. (→ Page 166)
W1551 Check function of exhaust flap actuators. (→ Page 113), (→ Page 159)
W1575 Check general condition of trunnion mounts (visual inspec-
tion). –
W1610 Check securing screws of trunnion mounts for secure seat-
ing. (→ Page 156)
W1636 Reset drift compensation parameter (CDC) and enter injec-
tion codes (IIG). (→ Page 163)
W1675 Replace fuel prefilter or its filter element. (→ Page 183), (→ Page 171)
44 | Maintenance | MS15043/00E 2016-04
TIM-ID: 0000067970 - 001