MTU 20V4000C55, Руководство по эксплуатации

Страница: 210 / 226

Tightening torques for male unions to MTN 5183-3 standard
This standard applies to male unions to DIN 2353 Series L with threaded end to DIN 3852 Form A (sealed by
sealing ring to DIN 7603-Cu).
Tightening torques M
A
are given for male unions made of steel (St) with phosphatized surface coating and
oiled, or galvanized.
Threads and mating faces beneath heads must be coated with engine oil prior to assembly.
An assembly tolerance of +10% of the figures in the table is permitted due to unavoidable deviations during
the tightening process.
Thread
inserted in steel/gray cast iron M
A
(Nm)
M10 x 1 15
M12 x 1.5 20
M14 x 1.5 35
M16 x 1.5 50
M18 x 1.5 60
M22 x 1.5 70
M26 x 1.5 100
M32 x 2 160
M42 x 2 260
M48 x 2 320
M
A
= tightening torques
210 | Appendix A | MS15043/00E 2016-04
TIM-ID: 0000002333 - 017