MTU 20V4000C55 Скачать руководство пользователя страница 104

Страница: 104 / 226

Install installation/removal jig (2) on cylinder
head.

Remove injector (1) and hold-down clamp
with installation/removal jig (2).

Remove installation/removal jig (2).

10.

Clean all mating and sealing surfaces.

11.

If carbon residue is present, clean sealing
face on cylinder head and protective sleeve
with milling cutter.

12.

Seal old injector with plug and cap of new in-
jector.

13.

Cover all connections and bores, or seal with
suitable plugs.

Installing injector

Note:

Do not remove plug for HP line until directly
before assembly of the adapter.

Prior to installation, remove plug.

Coat injector with assembly paste at the seat
of the nozzle retaining nut.

Note:

A new sealing ring is included in the scope of
delivery of the injector.

Insert new sealing ring (arrowed).

Note:

New O-rings and damping ring are included in
the scope of delivery of the injector and are
pre-assembled.

Coat O-rings (2, 3) and damping ring on new
injector (1) with assembly compound.

Insert injector (1) together with hold-down
clamp into cylinder head, ensuring that the
high-pressure fuel line connection is aligned
correctly.

104 | Injector | MS15043/00E 2016-04

TIM-ID: 0000053873 - 004

Содержание 20V4000C55



































































































































































































































Результаты поиска

Содержание 20V4000C55

Отзывы:

Похожие инструкции для 20V4000C55

Бренды по названию

Популярные бренды

MTU 20V4000C55, Руководство по эксплуатации

Результаты поиска

Содержание 20V4000C55

Отзывы:

Похожие инструкции для 20V4000C55

Бренды по названию

Популярные бренды