manualshive.com logo in svg

MR TAPCON 260, Руководство по эксплуатации

Поделиться
Скачать
MR TAPCON 260 Скачать руководство пользователя страница 53

6 Functions and settings

Maschinenfabrik Reinhausen 2014

53

2374092/04 EN

TAPCON® 260

Setting device ID

You can use the device ID parameter to assign a 4-digit ID to the device.
This ID is used to uniquely identify the device in the TAPCON®-trol software.

To set the device ID, proceed as follows:

1.

 > 

 Configuration > 

 General > Press 

 until the desired

parameter is displayed.

ð

Regulator ID.

2.

Press 

 to change the first digit.

ð

If you wish to enter a multi-digit sequence, proceed to step 3. If you
do not wish to enter additional digits, proceed to step 7.

3.

Press 

 (digit > 9) until another digit position appears.

4.

If necessary, press 

 in order to highlight the digit position.

ð

The required digit is highlighted and can be changed.

5.

Press 

 or 

 to change the digit.

6.

Repeat steps 3 to 5 until all required digits have been entered.

7.

Press 

.

ð

The device ID is set.

Setting the baud rate

You can use this parameter to set the COM1 interface's baud rate. You can
select the following options:
▪

9.6 kilobaud

▪

19.2 kilobaud

▪

38.4 kilobaud

▪

57.6 kilobaud

To set the baud rate, proceed as follows:

1.

Press 

 > 

 Configuration > 

 General > 

 until the desired

parameter is displayed.

ð

Setting the baud rate.

2.

Press 

 or 

 to select the required baud rate.

3.

Press 

.

ð

The baud rate is set.

6.3.1

6.3.2

Содержание TAPCON 260









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды