manualshive.com logo in svg

MR TAPCON 260, Руководство по эксплуатации

Поделиться
Скачать
MR TAPCON 260 Скачать руководство пользователя страница 40

5 Commissioning

Maschinenfabrik Reinhausen 2014

40

2374092/04 EN

TAPCON® 260

Setting the language

You can use this parameter to set the display language for the device. The
following languages are available:

English

Italian

German

Portuguese

French

Russian

Spanish

 

To set the language, proceed as follows:

1.

 > 

 Configuration > 

 General.

ð

Language

2.

Press 

 or 

 to select the required language.

3.

Press 

.

ð

The language is set.

Setting date and time

You must set the system date and system time on the device. You must set
the date and time in the following formats:

Date

Time

DD.MM.YY

HH:MM:SS

Table 9: Formats

 

The time does not switch from daylight saving time to standard time and
back automatically. You have to change the time manually.

Time

To set the time, proceed as follows:

1.

 > 

 Configuration > 

 Continue > 

 Memory > Press 

until the desired display appears.

ð

Time

2.

Press 

 to highlight a digit.

ð

The desired position is highlighted and the value can be changed.

3.

Press 

 to increase the value or 

 to reduce it.

4.

Press 

.

ð

The time is set.

5.2.1

5.2.2

 

Содержание TAPCON 260









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды