Motortech VariStep3, Руководство по эксплуатации

Страница: 60 / 92

8 Settings via the MICT
60 Rev. 08/2018
8.9.4 Miscellaneous – Communication
CAN
Via the field CAN , deactivate or activate the CAN interface of the device.
– ALL-IN-ONE (J1939)/CANopen
Select the desired protocol, depending on whether you want to set the communication for
the ALL-IN-ONE or for another master control.
– Source Address/CANopen Node ID
In the protocol ALL-IN-ONE (J1939) the source address can be assigned between 0 and 253.
In the CANopen protocol, a CANopen node ID from 1 to 127 can be assigned. Note that IDs
cannot be assigned more than once.
– Baudrate
Select the desired data transfer rate from the list. In the protocol ALL-IN-ONE (J1939) ,
250 kbit/s and 500 kbit/s are available for selection. In the CANopen protocol, a baud rate
from 50 kbit/s to 1 Mbit/s can be set. For both protocols, we suggest the use of a baud rate
of 250 kbit/s.