Motortech VariStep3, Руководство по эксплуатации

Страница: 58 / 92

8 Settings via the MICT
58 Rev. 08/2018
Settings of the input selected
Analog Inputs (Current or Voltage)
Based on the values used by your master control, you can define the values
of the Open and the Close position for the analog inputs in the MICT. The
value applied to the input is then converted proportionally to the values
entered in a corresponding opening angle of the throttle or the fuel ring of
the VariFuel2.
Example:
Your master control works with a current input of 4 mA to 20 mA. In the
MICT, you configure 4 mA to refer to the closed position and 20 mA to the
open position. If the current on the input is now 16 mA, the opening is 75 %.
Binary inputs
In the MICT, enter the settings for the binary inputs Dir and Steps . The level
on the Dir determines the direction in which the fuel ring of the VariFuel2 or
the throttle will move if there are pulses on the Steps .
Example:
You have selected the option High -> Open in the MICT under Direction . If a
high level is applied on the Dir , with each pulse on the Steps one step is
added to the current position. The fuel ring or throttle will then move
gradually from the Closed to the Open direction.
Unused inputs and outputs
Please note that the terminals for the analog inputs and outputs not
selected in the MICT must remain unoccupied.