7 Functions
Rev. 08/2018
39
Various functions are at your disposal on the four operating levels. The figure below illustrates
this:
The following functions are available on the different levels:
–
Level 0 (Read Only)
Enables read-only access for all users.
–
Level 1 (Operator)
At this level the user can make position changes (closed and open position, position 1 and
position 2, and make manual changes to the opening). Beyond that, he can change the
operation mode and can confirm errors.
–
Level 2 (Service)
The service personnel can also initiate a reference run and reset the counter in the runtime
data for the maximum number of step losses that occurred.
–
Level 3 (Master)
At this level, the master can also reset all PINs and enable or disable the access control.
Moreover, only the master is authorized to download a changed configuration to the stepper
motor driver.
For information on the access levels in the MICT, refer to the section
Access Levels in the MICT
on
page 41.
Содержание VariStep3
Страница 1: ...VariStep3 Stepper Motor Driver Operating Manual P N 01 50 020 EN Rev 08 2018...
Страница 16: ...4 Product Description 16 Rev 08 2018...
Страница 91: ...Rev 08 2018 91...
Страница 92: ......
