Motortech VariStep3, Руководство по эксплуатации

Страница: 11 / 92

2 Safety Instructions
Rev. 08/2018 11
Explosion hazard!
If the system is not entirely tight and sealed, gas may escape and result in
explosion hazard. Upon completion of all assembly works, always check the
system's tightness. The formation of explosive gases in the area of the
device must be prevented, e.g. by adequate ventilation or the use of gas
sensors which switch off the gas supply.
All works involving gas-carrying parts must be executed by trained
personnel only.
Explosion hazard!
Do not disconnect any connectors while the system is live. If the system is
located in a hazardous area, there is a risk of explosion.
Operational safety!
All screws of the connectors must be adequately tightened.
Risk of destruction due to electrostatic discharge!
The VariStep3 stepper motor driver may only be installed by specialized
personnel who has been trained in handling ESD sensitive components and
with due regard to relevant ESD standards. It must be installed into a
control cabinet, and it must comply with the ESD standard DIN EN 61340-5-
1; VDE 0300-5-1:2008-07.
Damage caused by electrostatic discharge is not covered by warranty.
Risk of burning!
The surfaces of the system may heat up to high temperatures. Ensure good
heat transfer through ventilation when installing in the control cabinet.