Motorola WiNG 4.4, Справочное руководство

Страница: 455 / 598

Switch Security 6 - 103
9. Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel to close the dialog without committing updates to the running configuration.
6.8.7 Viewing Radius Accounting Logs
Accounting logs contain information about the use of remote access services by users. This information is of great
assistance in partitioning local versus remote users and how to best accommodate each. Remote user information can be
archived to a location outside of the switch for periodic network and user permission administration.
To display the Radius accounting logs:
1. Select Security > Radius Server from the main menu.
Time of Access
Start Set the time the group is authenticated to interoperate. Each user within the group is
authenticated with the local Radius server. Those group members successfully authenticated are
allowed access to the switch using the restrictions defined for the group.
Time of Access End Set the time each group’s user base will loose access privileges within the switch managed
network. After this time, users within this group will not be authenticated by the local Radius
server. However, if a user is part of a different group that has not exceeded their access end
interval, the user may still interoperate with the switch (remain authenticated) as part of that
group.
Rate Limit Uplink
(0,100-100000) Set the rate limit from the wireless client to the network when using Radius authentication. A
rate limit of 0 disables rate limiting for this direction. Any rate limit obtained through radius
server authentication overwrites the initial user rate limit for the given MU.
Rate Limit
Downlink
(0,100-100000) Set the rate limit from the network to the wireless client when using Radius authentication. Any
rate limit obtained through radius server authentication overwrites the initial user rate limit for
the given MU.
Available WLANs Use the Available WLANs Add -> and Remove <- functions to move WLANs for this new group
from the available list to the configured list. Once on the configured list (and the changes
applied), the members of this group can interoperate with the switch on these WLANs (once
authenticated by the local Radius server).
Configured WLANs The Configured WLANs columns displays the WLANs this new group can operate within (once
users are configured). Use the
Add -> and Remove <- functions to move WLANs from the
available list to the configured list.
Time of access in
days Select the checkboxes corresponding to the days of the week you would like this new group to
have access to the switch managed network. Of course, the user base within the group still
needs to be authenticated by the local Radius server first.
NOTE: Rate limiting parameters need to be part of Radius Access Accept packets. If any
radius server doesn't send rate limit parameters in Radius Access Accept packet, these
parameters will not be configured.