Motorola WiNG 4.4, Справочное руководство

Страница: 193 / 598

Network Setup 4 - 89
4.7 Viewing Access Port Information
The Access Ports screen displays a high-level overview of the APs created for use within the switch managed network.
Use this data as necessary to check all the APs that are active, their VLAN assignments, updates to AP description as well
as their current authentication and encryption schemes.
The Access Ports screen consists of the following tabs:
• Configuring Access Port Radios
• Viewing AP Statistics
• Configuring WLAN Assignment
• Configuring WMM
• Configuring Access Point Radio Bandwidth
• Configuring Radio Groups for MU Load Balancing
• Viewing Active Calls (AC) Statistics
4.7.1 Configuring Access Port Radios
Refer to the Configuration tab to view existing radio configurations available to the switch. After reviewing the radios
listed, you have the option of editing a radio’s properties, deleting a radio, adding a new radio, resetting a radio, scanning
available channels, or exporting a radio.
To view Access Port Radio configuration details:
1. Select Network > Access Port Radios from the main menu tree.
NOTE: Up to 256 Access Ports are supported by the RFS6000 and RFS7000 switches. Up
to 6 Access Ports and 24 Adaptive APs are supported by the RFS4000 switch. The actual
number of Access Ports adoptable by a switch is defined based on access port or Adaptive
AP licenses and on a per platform basis and will typically be lower than 256.
NOTE: The Motorola Solutions RF Management Software is a recommended utility to
plan the deployment of the switch and view its configuration once operational. Motorola
Solutions RFMS can help optimize the positioning and configuration of a switch and
Access Ports in respect to a WLAN’s MU throughput requirements. For more information,
refer to the Motorola Solutions Website.