Motorola WiNG 4.4, Справочное руководство

Страница: 382 / 598

6 - 30 WiNG 4.4 Switch System Reference Guide
6. If the properties of an existing filter fulfill to your needs but still require modification to better filter devices, select the
Edit button. For more information see,
Editing an Existing Wireless Filter on page 6-30 .
7. If an existing filter is now obsolete, select it from those listed and click the Delete button.
8. Click the Add button to create a new filter. For more information, see Adding a new Wireless Filter on page 6-31 .
9. Click the Memberships button to display a screen wherein a selected index can be added to one or more existing
WLANs. For more information see, Associating an ACL with WLAN on page 6-32
10.Click on the Export button to export the contents of the table to a Comma Separated Values file (CSV).
6.4.8 Editing an Existing Wireless Filter
Use the Edit screen to modify the properties of an existing filter. This is recommended if an existing filter contains
adequate device address information, but the allow/deny permissions need to be changed or if only minor changes are
required to the starting and ending MAC addresses. If significant changes are required to a usable filter, consider creating
a new one.
To edit an existing filter:
1. Select Security > Wireless Firewall from the main menu tree.
2. Click on the Security Policy tab.
3. Click on the Wireless Filters tab.
4. Select one of the existing ACLs from the filters list.
5. Click the Edit button at the bottom of the screen to launch a screen for editing an ACL.
The user can modify an ACL Index (numerical identifier) for the ACL, and edit the starting an ending MAC address range
for the devices allowed or denied access to the switch managed network.
6. The MU-ACL Index is used as an identifier for a MAC Address range and allow/deny ACL designation. The available
index range is 1 - 1000. However, the index is not editable, only its starting/ending MAC range and allow/deny
designation. If a new index is needed, create a new filter.
7. Modify the existing Starting MAC for the target Index or leave the Starting MAC value as is and just modify the
Ending MAC Address or Allow / Deny designation.
8. Modify the existing Ending MAC for the target Index. Enter the same Starting MAC address within the Ending MAC
field to use only the Starting MAC address as either allowed or denied access to the switch managed network.