Motorola WiNG 4.4, Справочное руководство, Страница: 304 / 598

5 - 24 WiNG 4.4 Switch System Reference Guide
2. Select the Configuration tab.
3. An ACL Id must be created before it is selectable from any of the drop-down menus. Refer to the Access Group field
to define the following:
4. Refer to the Other Settings field to define the following:
Full Access
Supply a numeric ACL ID from the drop-down menu to provide the ACL full access.
Only Control
Queries
Supply a numeric ACL ID from the drop-down menu to provide the ACL only control
query access to SNTP resources.
Server and Query
Access
Enter a numeric ACL ID from the drop-down menu to provide the ACL Server and
Query access to SNTP resources.
Only Server Access
Provide a numeric ACL ID from the drop-down menu to provide the ACL only server
access to SNTP resources.
Authenticate Time
Sources Select this checkbox to ensure credential authentication takes place
between the SNTP server and the switch. When this checkbox is selected,
the Apply and Revert buttons become enabled to save or cancel settings.
Act As NTP Master
Clock When this checkbox is selected, the Apply and Revert buttons become
enabled to save or cancel settings within the Other Settings field.
Clock Stratum Define how many hops (from 1 to 15) the switch is from a SNTP time
source. The switch automatically chooses the SNTP resource with the
lowest stratum number. The SNTP supported switch is careful to avoid
synchronizing to a server that may not be accurate. Thus, the SNTP enabled
switch never synchronizes to a machine not synchronized itself. The SNTP
enabled switch compares the time reported by several sources, and does
not synchronize to a time source whose time is significantly different than
others, even if its stratum is lower.