Motorola WiNG 4.4, Справочное руководство

Страница: 361 / 598

Switch Security 6 - 9
6.2.4 Unauthorized APs (MU Reported)
Use the Unauthorized APs (MU Reported) tab to review unapproved Access Points detected by associated MUs. The
criteria for Access Point approval was defined using the Security > Access Point > Configuration screen, using the
values defined within the MU Assisted Scan field.To view unapproved Access Points detected by switch radio
associated MUs:
1. Select Security > Access Point Detection from the main menu tree.
2. Click on the -Unauthorized APs (MU Reported) tab.
3. The Unauthorized APs (MU Reported) table displays the following information:
4. The Number of Unauthorized APs is simply the sum of all of Unapproved Radio MAC Addresses detected.
5. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
6.2.5 AP Containment
Use the rogue AP Containment feature to provide protection from rogue Access Points by disrupting traffic to mobile
units associated with the Rogue AP and prevents new mobile units from getting associated to the Rogue AP.
To configure Access Point Containment and view rogue APs:
1. Select Security > Access Port Intrusion Detection from the main menu tree.
BSS MAC Address Displays the MAC Address of each Unapproved AP. These MAC addresses are Access Points
observed on the network (by associated MUs), but have yet to be added to the list of approved
APs, and are therefore interpreted as a threat on the network.
Reporting MU Displays the numerical value for the detecting MU.
Last Seen (In
Seconds) Displays the time (in seconds) the Unapproved AP was last seen on the network by the detecting
MU. Use this interval to determine whether the detected MU is still a viable threat.
ESSID Displays the ESSID of each Unapproved AP. These ESSIDs are device ESSIDs observed on the
network, but have yet to be added to the list of Approved APs and are therefore interpreted as a
threat.