Motorola WiNG 4.4, Справочное руководство

Страница: 358 / 598

6 - 6 WiNG 4.4 Switch System Reference Guide
9. Select an Allowed AP and click the Delete button to remove the AP from list of Allowed APs.
10.Click the Add button to display a screen used to enter device information for a new AP added to the Allowed AP list.
For more information, see Adding or Editing an Allowed AP on page 6-6 .
6.2.1.1 Adding or Editing an Allowed AP
To add a new address range or modify the address range used to designate devices as allowed:
1. Select Security > Access Point Detection from the main tree menu.
2. Click the Configuration tab.
3. Select an existing Allowed AP and click the Edit button to modify the properties of an existing Allowed AP or click the
Add button to define the attributes of a new Allowed AP.
4. If adding a new Allowed AP, use the Index parameter to assign a numerical index value to this particular Access Point.
The index range is from 1-200. If editing an existing Allowed AP, this is a read only field and cannot be modified.
5. Refer to the BSS MAC Address field to define the following:
6. Refer to the ESSID field to configure Access Point ESSID permissions.
7. Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
8. Click OK to use the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Any MAC Address/
Specific MAC
Address Click the Any MAC Address radio button to allow any MAC address detected on the network as
an Allowed AP. This is not necessary if a specific MAC address is used with this index.
Click the second radio button to enter a specific MAC address as an Allowed AP. Use this option
if (for network security) you want to restrict the number of MAC Addresses to a single MAC
address.
Any ESSID/
Specific ESSID Click the Any ESSID radio button to allow any ESSID located on the network as an Allowed AP.
This may not be necessary if a specific ESSID was used with this particular index.
Click the second radio button to enter a specific ESSID as an Allowed AP. Use this option if (for
network security) you want to restrict the number of device ESSIDs saved for this index to a single
Access Point ESSID.