manualshive.com logo in svg

Motorola WiNG 4.4, Справочное руководство, Страница: 348 / 598

Поделиться
Скачать
Motorola WiNG 4.4 Скачать руководство пользователя страница 348

5 - 68 WiNG 4.4 Switch System Reference Guide

Once SOLE has been enabled MUs found by the locationing engine will be displayed in the

 Located MUs

 table at the 

bottom of the page. For each located MU the following information is displayed:

5.8.5 Configuring Aeroscout Parameters

To configure the switch to work with an external Aeroscout RTLS engine:

1. .

Services 

> 

RTLS 

from the main menu tree.

2. Select the 

Aeroscout

 tab.

3. Check the 

Enable

 checkbox to globally enable Aeroscout RTLS support on the switch. 

This takes effect immediately when the box is checked.

4. Enter the 

Multicast MAC Address

 used for all Aeroscout tags to send updates via multicast to the MAC address 

specified. Typically the MAC address will start with 01-0C-CC-XX-XX-XX.

MAC

Lists the MAC Addresses of all MUs which have been located by the switch.

Location: 
X Coordinate

Displays the value of the X Coordinate for each located MU. The X coordinate is relative to the 
origin point of 0,0 in the upper left corner of the site map.

Location: 
Y Coordinate

Displays the value of the Y Coordinate for each located MU. The Y coordinate is relative to the 
origin point of 0,0 in the upper left corner of the site map.

Timestamp

Displays the last time for each MU that its location was computed by the switch.

Zone

Lists the last known zone for each located MU. Zone configuration can be defined using the CLI 
interface only. When no zones are configured, the switch defaults the entire site to Zone 0.

NOTE: 

Zone configuration can be defined using the CLI interface only. For information on Zone 

Configuration please see the 

Motorola Solutions RF Switch CLI Reference.

NOTE: 

To use the onboard SOLE engine to locate Aeroscout tags, site parameters, AP 

location (Command Line Interface only) and Zone configuration (optional, Command Line 
Interface only) must be configured.

Содержание WiNG 4.4























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов