Motorola WiNG 4.4, Справочное руководство, Страница: 483 / 598

Switch Management 7 - 7
3. Modify the Community Name used to associate a site-appropriate name for the community. The name revised from
the original entry is required to match the name used within the remote network management software.
4. Modify the existing read-only (R) access or read/write (RW) access for the community. Read-only access allows a
remote device to retrieve information, while read/write access allows a remote device to modify settings.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch
7. Click Cancel to return back to the SNMP v1/v2 screen without implementing changes.
7.3.2 Configuring SNMP v3 Access
SNMP Version 3 (SNMPv3) adds security and remote configuration capabilities to previous versions. The SNMPv3
architecture introduces the
User-based Security Model (USM) for message security and the View-based Access Control
Model (VACM) for access control. The architecture supports the concurrent use of different security, access control, and
message processing techniques.
Refer to the v3 screen to review the current SNMP v3 configuration. An Existing User Name can be selected and edited,
enabled or disabled. .
To review existing SNMP v3 definitions:
1. Select Management Access > SNMP Access from the main menu tree.
2. Select the V3 tab from within the SNMP Access screen.
NOTE: The SNMP undo feature is not supported in this product.