Motorola WiNG 4.4, Справочное руководство, Страница: 489 / 598

Switch Management 7 - 13
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the Disable all sub-items button to disable the
item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of them.
10.Click Apply to save the trap configurations enabled using the Enable or Enable all sub-items options.
11.Click Revert to discard any updates and revert back to its last saved configuration.
7.4.1.1 Configuring E-mail Notifications
To enable e-mail notification:
1. Select Management Access > SNMP Trap Configuration from the main menu tree.
2. Click the Email Configuration button to launch a dialogue where you can configure outgoing E-mail servers and
addresses for alerts.
3. Check the Enable SMTP box to enable the outgoing mail server on the switch. In order to use E-mail notification on
the switch, this box must be checked.
Configure the SMTP mail server properties as follows:
Name Enter the hostname of your outgoing SMTP mail server. This is the server that is used to deliver outgoing
mail.
Port Specify the port number used by your outgoing SMTP server. In many cases this is port 25.
User Name Enter the username for the user which will be sending outgoing mail through the SMTP server.
Password Enter the password associated with the above username.
Enable Authentication Check the Enable Authentication box to enable support for SMTP Authentication which is required for
certain outgoing SMTP servers.