Motorola SC 300, Руководство по установке

Страница: 68 / 96

Dimensions and Clearances
DRAFT
SC 300 1X BTS Hardware Installation, ATP, and FRU Procedures
JAN 2002
2-8
Overview
This information covers the dimensions and clearances associated with
the MicroCell and Primary Surge Suppressor units.
Dimensions and Clearances
Table 2-2, Table 2-3, Figure 2-2 through Figure 2–7 show the installed
dimensions and recommended clearances for each item.
Table 2-2: Installation Dimensions for the MicroCell and Primary Surge Suppressor Units
Item Height Width Depth Weight
MicroCell
(fully installed)
730 mm
28.76 in.
590 mm
23.25 in.
254 mm
10.01 in.
38.5 kg
84.7 lbs
MicroCell
(unit only)
590 mm
23.22 in.
450 mm
17.71 in.
150 mm
5.90 in.
24 kg
52.8 lbs
Primary Surge
Suppressor
(fully installed)
730 mm
28.76 in.
590 mm
23.25 in.
254 mm
10.01 in.
19.17 kg
42.26 lbs
Primary Surge
Suppressor
(unit only)
510 mm
20.08 in.
465 mm
18.32 in.
125 mm
4.93 in.
11 kg
24.26 lbs
Table 2-3 Minimum Clearances for MicroCell
Item Front Back Left Right Top Bottom
Installation and
Maintenance
Requirements
600 mm
23.62 in.
0 100 mm
3.93 in.
200 mm
7.87 in.
0 0
Functional
Requirements
(with solar cover)
0 0 100 mm
3.93 in.
200 mm 50 mm
1.96 in.*
50 mm
1.96 in.*
Functional
Requirements
(without solar
cover)
50 mm
1.96 in.
0 200 mm
7.87 in.
200 mm
7.87 in.
50 mm
1.96 in.
50 mm
1.96 in.
* Within these boundaries, area must remain 25% unobstructed. This is the open surface area at any cross
section. See Figure 2-7.
2