Motorola APEX1000, Инструкция по установке и эксплуатации

Страница: 254 / 335

B
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
236
573408-001-a
Chassis Redundancy Status window parameters
Parameter Description
Redundancy Status
Redundancy Role Describes the functional role of the designated APEX.
Values are:
•
Primary – The APEX which is typically active
•
Secondary – The APEX which is typically standing by
Primary APEX
Status
Describes the functional state of the primary APEX. Values are:
•
Unknown – State of the Primary is not known. (Heartbeat not received)
•
Active – Primary RF outputs are active
•
Standby – Primary RF outputs are muted. Waiting to become active
•
Fault – The Primary has experienced a fault
•
Suspended – User has enabled Suspend on the Primary APEX
The default is Standby.
Secondary APEX
Status Describes the functional state of the secondary APEX. Values are:
•
Unknown – State of the Secondary is not known. (Heartbeat not received)
•
Active – Secondary RF outputs are active
•
Standby – Secondary RF outputs are muted. Waiting to become active
•
Fault – Fault on the Secondary
•
Suspended – User has enabled Suspend on the Secondary APEX
The default is Unknown.
Redundancy
State/Availability
Shows the availability state of the 1:1 redundancy system.
Values are:
Available
1. Primary in active state received heartbeat
from Secondary in standby state
or
2. Secondary in active state received heartbeat
from primary in standby state
• Configurations are synchronized
• No critical faults
Protected 1. Primary in fault state received heartbeat from
Secondary in active state
or
2. Secondary in fault state received heartbeat
from Primary in active state
• Configurations are synchronized
Unavailable
•
Timeout waiting for heartbeat from other
APEX in redundancy pair
•
Configuration not synchronized
•
Primary or Secondary APEX in fault or
suspend state
Synchronizing
•
Synchronizing configuration between active
and standby APEXs