Motorola 68390 - Vanguard 320 Router, Руководство по установке

Страница: 42 / 106

2-12 Installing Vanguard 320 Hardware
Front Panel Dip Switches
Front Panel Dip Switches
Introduction
This section describes the front panel dip switches on the Vanguard 320.
Front Panel
Switches
Figure 2-4 illustrates the switches found behind the front panel of the Vanguard 320.
Figure 2-4. Vanguard 320 Front Panel Switches
Front Panel DIP
Switch Setting The six DIP switches on the front panel are defined as follows:
POWER
DATA IN
CTP-- PORT 4
DIAG.
DFLT NODE 3 3
TM
RI
Port
MB
RESET
STATUS
TEST
WATCHDOG
LAN 4 3 2 1
Default Node
To reset all configurable parameters, put
switch in up position and Power Cycle (or
Reset), then put switch in down position
and Power Cycle (or Restart) again.
Control Port Switch
Defaults Port 4 to 9600 bps 8N1.
1 2 3 4 5 6
DATA OUT
PORT
Switch
Position
Switch
Name
Down Up
1 RI/TM Pin 22 - Ring Indicator DCE Test Mode Input
2 MB/TM Pin 22 - Make Busy DTE Test Mode Input
3 N/A N/A N/A
4 CTP-Port 4 CTP Configure Port 4 as PAD
port
5 DIAG Normal operation Execute diagnostics
6 DFLT-NODE Normal operation Reset CMEM
configuration