Motorola 68390 - Vanguard 320 Router, Руководство по установке

Страница: 40 / 106

2-10 Installing Vanguard 320 Hardware
Cabling the Vanguard 320
Cable and
Connector Pinouts For more information on cable and connector pinouts, refer to Appendix B,
Vanguard 320 Cabling or to the
Vanguard Daughtercard Installation Guide (Part
Number T0020) for information on the optional daughtercards.
Control Terminal
Port Cable Use an RJ45 (male) to DB25 (female) cable (Part Number 61781-12) that comes
with the Vanguard 320 to connect to the Control Terminal Port (CTP). The Vanguard
320 defaults this port to 9.6 kbps, 8 bits, no parity, 1 stop bit.
Note
If you plan to use a personal computer to configure the Vanguard 320, you may
need to purchase a DB25 (male) to DB9 (female) adapter for the serial port of
your personal computer. The serial ports on most personal computers require
DB9 connectors.
10BaseT Ethernet
Cable Follow these guidelines for 10BaseT cable connections:
• If you are connecting to a 10BaseT Hub, use a standard UTP cable
(RJ45 to RJ45).
• If you are connecting directly to a personal computer or Workstation LAN
card, use the 10BaseT crossover cable shipped with your Vanguard 320.
3 DB25 V.11, V.24, V.35,
V.36 DIM DB25-to-DB25
Cable V.11, V.35 and V.36 -
Max. sync speed 2
mpbs
V.24 - Max. sync
speed 80 kpbs, Max
async speed 115.2
kbps
Selectable
Integral DSU
DIM DSU/EIM Cable
Assembly and
Lease Line Telco
Cable shipped with
Integral DSU only DSU - 56 kbps
4 RJ45 CTP Port RJ45-to-DB25
CTP Cable shipped
with Vanguard unit Max. async speed
115.2 kbps DCE
LAN RJ45 10BaseT 10BaseT
Crossover cable
or
standard UTP cable
(RJ45-to-RJ45)
10Mbps
Port Connector Interface Cable Required Speed DCE/DTE