Motorola 68390 - Vanguard 320 Router, Руководство по установке

Страница: 31 / 106

Installing Vanguard 320 Hardware 2-1
Chapter 2
Installing Vanguard 320 Hardware
Overview
Introduction
This chapter covers the installation of Vanguard 320 hardware.
Follow These Steps
This table lists the steps you need to perform and shows you where to look for
information on installing the Vanguard 320:
Warning
The following special notices apply to all equipment handling procedures in this
manual.
Warning
Ports capable of connecting to ports on other apparatus are defined as Safety Extra
Low Voltage (SELV). To conform with EN60950, ensure that these ports are only
connected to ports of the same type on other apparatus.
Avertissement
Les ports qui sont susceptibles d’être connectés à des équipements sont désignés
comme TBTS. Pour garantir la conformité à la norme EN 60950, n’interconnecte
ces ports qu’avec des ports du même type sur des autres matériels.
Step To Perform This Action See This Procedure
1 Check the contents of the
shipping package to make sure
everything is included. “Checking Your Shipment Contents”
section on page 2-3.
2
Choose a site for the Vanguard
320. “Choosing a Site” section on page 2-4.
3 Connect cables for the
Vanguard 320. “Cabling the Vanguard 320” section on
page 2-6.
4
Set the front panel dip switches
if required. “Front Panel Dip Switches” section on
page 2-12.
5 Installing Optional
Daughtercard. “Installing Optional Daughtercards”
section on page 2-13.
6
If necessary, set up termination
resistance on the Vanguard 320. “ISDN Termination Resistance” section
on page 2-14.
7 Installing or Removing the
Lithium Battery. “Installing or Removing the Lithium
Battery” section on page 2-16.