manualshive.com logo in svg

MOTO GUZZI Stelvio 1200 NTX, Руководство по обслуживанию

Поделиться
Скачать
MOTO GUZZI Stelvio 1200 NTX Скачать руководство пользователя страница 251

Seat

•

Rest the vehicle on its stand.

•

Insert the key in the saddle lock.

•

Turn the key clockwise and slightly

press the centre of the passenger seat

rear part to facilitate releasing the pin.

•

Lift the passenger seat and slide it off

from behind.

•

Unscrew and remove the knobs fixing

the rider saddle.

•

Remove the rider saddle.

CAUTION

BEFORE LOWERING AND LOCKING THE SADDLE,
CHECK THAT THE KEY HAS NOT BEEN LEFT INSIDE THE
GLOVE-BOX / TOOLKIT COMPARTMENT

.

Engine guard

ENSURE THAT THE ENGINE AND THE THERMAL PARTS OF THE VEHICLE ARE COLD BEFORE
OPERATING ACCORDING TO THE FOLLOWING INSTRUCTIONS. PARK THE VEHICLE ON
STAND ON FIRM AND LEVEL GROUND.

•

Undo the screw and remove the rear

brake oil reservoir.

•

From the left side of the vehicle, re-

move the nut (1) and the correspond-

ing washer.

•

Slide off the frame pin (2) from the right

side with the corresponding washer.

STELVIO 1200 NTX

Bodywork

BODYW - 251

Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten

Содержание Stelvio 1200 NTX



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды