manualshive.com logo in svg

MOTO GUZZI Stelvio 1200 NTX, Руководство по обслуживанию

Поделиться
Скачать
MOTO GUZZI Stelvio 1200 NTX Скачать руководство пользователя страница 144

Cam timing

•

Fit the crankshaft and the service shaft

on the crankcase.

•

Fit the cylinders.

•

Turn the crankshaft until the left cylin-

der piston reaches the top dead centre

(TDC).

•

Fit the cotter and the shim washer on

the service shaft.

•

Fit the tone wheel with the chamfered

side facing the crankcase on the serv-

ice shaft.

•

Lock crankshaft rotation.

•

Unscrew and remove the nut fixing the

crankshaft gear.

•

Remove the oil pump control gear.

Specific tooling

12.91.18.01

 

Tool to lock the flywheel and the

starting ring gear

•

Fit the timing system gear and align the

reference with that on the crankshaft

gear. Turn the crankshaft to align the

two gears.

Engine

STELVIO 1200 NTX

ENG - 144

Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten

Содержание Stelvio 1200 NTX



















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды