Part Number: 000016427 Rev 00 08/2020 23
Requirements - Cleaning - Operation
8. Remove the ice damper
• Grasp ice damper and apply pressure toward the left hand
mounting bracket.
• Apply pressure to the right-hand mounting bracket with thumb.
• Pull ice damper forward when the right-hand ice damper pin
disengages.
Installation
• Place ice damper pin in left-hand mounting bracket and apply pressure toward the
left-hand mounting bracket.
• Apply pressure to the right-hand mounting bracket with thumb.
• Push ice damper toward evaporator until right-hand damper pin engages.
9. Remove the Bin Door
A. Grasp the rear of the bin door and pull bin door forward
approximately 5" (13 cm).
B. Slide bin door to the rear while applying upward pressure (The
rear door pins will ride up into the track slot and slide backward
to the stop tab).
C. While applying pressure against the bin door pull down on the
rear of each bin door track until the door pins clear the stop tabs.
D. Slide the rear door pins off the end and then below the door
track. Slide bin door forward allowing the back of the door to
lower into the bin. Continue forward with the bin door until the
front pins bottom out in the track.
E. Lift right side of door until the front pins clear the track, then remove door from
bin.
F. Remove rollers (4) from all door pins.
10. Continue with Step 6 on page 18
A
B
C
F
D
Содержание PKM0335
