SECTION 1
Display Overview
The ELI 150 Rx features a 320 x 240 pixel LCD display for valuable preview of ECG waveform, function key
labels, and other parameters as explained below:
• Heart Rate (HR): When a patient is connected to the ELI 150 Rx, his/her HR is displayed in real time.
The HR is the average ventricular rate measured over an average of the patient’s last five beats.
Figure 1-6
NOTE:
If a lead fail occurs, an indicator flashes in this location.
• Speed: Use
Speed
(
F3
) to select one of the various options for display speed or rhythm printout speed: 5 mm/s,
10 mm/s, 25 mm/s, or 50mm/s. Paper speed is printed at the bottom right corner of the ECG printout.
NOTE:
ECG paper speed is configured in page two of the configuration menus.
(See Section 4.)
• Gain: Use
F4
(
Gain
) to select waveform amplitude for display and printout: 5 mm/mV, 10 mm/mV, or
20 mm/mV. Gain is printed at the bottom right corner of the ECG printout.
• Filter: Use
F5
(
Filt
) to select the low-pass filter options: 40 Hz, 150 Hz, or 300 Hz for ECG printouts.
Filter is printed at the bottom right corner of the ECG printout.
• Clock: Time display with hour, minutes, and seconds resolution. (See Section 2 for setting a new time
and date.) When the ECG is acquired, the time displayed is the printed ECG acquisition time.
Function Keys
Function keys activate the liquid crystal display (LCD) label adjacent to each function key. LCD labels/functions
change depending upon the screen displayed. If the label is blank, the adjacent function key is not active.
6
Содержание ELI 150 Rx
