SECTION 4
30
Configuration Page 3
Append
A status or statement phrase can be appended to the ECG and printed under the interpretive text printout.
Either “unconfirmed report” or “reviewed by” can be selected; however, if you wish to have nothing
appended to the ECG, select “blank”.
Number of Copies
Defines the number of printed copies when an ECG is taken. A zero (0) setting prints the original only;
one (1) prints the original plus 1 copy; two (2) prints the original plus 2 copies, and so on. Up to 9 copies
may be selected.
ECGs Retrieved
Defines the number of ECGs retrieved from an E-Scribe Rx system. The ECGs are retrieved by ID number.
A zero (0) setting retrieves the most current ECG for that ID number. Settings from one (1) to seven (7)
retrieve the most current ECG plus “X” number of ECGs identified by the entered value. EXAMPLE: If you
enter the number 5, you will retrieve the most current ECG plus the five preceding ECGs for that ID number.
ECGs retrieved from the E-Scribe Rx are only printed at the ELI 150 Rx and not saved.
Delete Rule
Defines the rule to mark ECGs as deleted in the ECG directory. ECGs that are marked for deletion will be
automatically removed or erased based on their acquisition date (a first-in/first-out philosophy) to make room
for the new ECG record. ECGs are only erased from the directory when they are marked for deletion and if
the directory becomes full. More than one ECG may be removed from the directory in order to make room
for the new incoming record. The delete rule selections are:
• Post Plot = ECG is automatically marked for deletion after printing
• Post Transmit = ECG is automatically marked for deletion after transmission
• Post Plot/Transmit = ECG is automatically marked for deletion after transmission and printing
Storage Sensitivity
Dictates the resolution of all stored ECG records. The sensitivity setting is either Normal or High. If the value is
set to High, the stored ECG will have a high resolution. As a result, the record size will be large and will reduce
the storage capacity in the ECG directory.
Auto-Save ECG
Defines whether or not a newly acquired ECG will be automatically saved to the directory once it is acquired
and printed. If the auto-save configuration option is set to No and the record is printed, the ELI 150 Rx
will prompt you to “Save ECG?”
F1
(
SAVE
) will store the ECG in the directory.
NOTE:
Manually save ECGs by selecting
F5
(
More
) from the acquired ECG view
and
F5
(
Save
).
Содержание ELI 150 Rx
