Electromagnetic compatibility with surrounding devices should be assessed when using the device.
An electronic device can either generate or receive electromagnetic interference. Testing for electromagnetic
compatibility (EMC) has been performed on the device according to the international standard for EMC
for medical devices (IEC 60601-1-2). This IEC standard has been adopted in Europe as the European
Norm (EN 60601-1-2).
The device should not be used adjacent to, or stacked on top of other equipment. If the device must be
used adjacent to or stacked on top of other equipment, verify that the device operates in an acceptable
manner in the configuration in which it will be used.
Fixed, portable, and mobile radio frequency communications equipment can affect the performance of
medical equipment. See Table X-4 for recommended separation distances between the radio equipment
and the device.
The use of accessories and cables other than those specified below, may result in increased emissions or
decreased immunity of the device.
9293-032-50
ELI standard patient cable, 12-lead, banana - AHA
9293-032-51
ELI standard patient cable, 12-lead, banana - IEC
9293-033-50
ELI standard patient cable, 12-lead, snap - AHA
9293-033-51
ELI standard patient cable, 12-lead, snap - IEC
9281-002-50
Banana plug to snap lead wire, 4 mm, set of 10
3181-008
Power cord, hospital grade, 8' U.S.
3181-002
Power cord, hospital grade, 8' International
ELECTROMAGNETIC COMPATIBILITY (EMC)
xv
Содержание ELI 150 Rx
