Mortara ELI 150 Rx, Руководство пользователя

Страница: 10 / 76

User Safety Information (Continued)
Wireless Data Transmission
• The device can be equipped with an optional wireless data transmission module (WLAN or GSM/GPRS
mobile). Both these technologies use radios to transmit data to a Mortara receiving application. Due to
the nature of radio transmissions, it’s possible that, due to the characteristics of the environment where
the device is located, some other RF sources may interfere with the transmission generated by the device.
Mortara Instrument has tested the coexistence of the device with other devices that can interfere such as
devices using WLAN, Bluetooth radio, and/or cell phones. Although the current technology allows a very
successful rate of transmission, it’s possible that in some rare occurrences, the system may not perform at its
best resulting in a “failed transmission.” When this occurs, patient data will not be erased from the device
nor stored in the receiving application, ensuring that partial or corrupted data are not made available to the
receiving station. If the failure mode persists the user should move to a position where the RF signals may
propagate better and allow successful transmissions.
WLAN Option
• Wireless options transmit at 2.4 GHz. Other nearby wireless devices may cause interference. If possible,
move or turn off other devices to minimize potential interference.
• The following table shows the channels allocated in different geographic areas in the world. Please consult
with your IT personnel in order to set the device on the proper channels.
viii
Specification Description
Technology IEEE 802.11 b/g DSSS, WiFi compliant
Frequency 2.400 – 2.4835 GHz (U.S./CAN/Japan/Europe)
2.471 – 2.497 GHz (Japan)
Channels U.S.A./CANADA: 11 channels (1-11)
Europe:
13 channels (1-13)
Japan: 14 channels (1-14)
France: 4 channels (10-13)
RF Power +15dBm (typical) approx. 32 mW