Morgensen MSI350 Series, Руководство пользователя, Страница: 94 / 388

94
Function
code
Name Detailed parameter description
Default
value
keypad
P17.09 Motor output torque -250.0–250.0% 0.0%
P17.15
Torque reference
value
-300.0–300.0% (rated motor current) 0.0%
5.8.6 Motor parameter
 Check the safety conditions surrounding the motor and load machineries before
autotuning as physical injury may occur due to sudden start of motor during autotuning.
 Although the motor does not run during static autotuning, the motor is stilled
supplied with power, do not touch the motor during autotuning; otherwise, electric shock
may occur.

If the motor has been connected to load, do not carry out rotary autotuning;
otherwise, misact or damage may occur to the inverter. If rotary autotuning is carried out
on a motor which has been connected to load, wrong motor parameters and motor
misacts may occur. Disconnect the load to carry out autotuning if necessary.
MSI350 inverter can drive asynchronous motors and synchronous motors, and it supports two sets of
motor parameters, which can be switched over by multi-function digital input terminals or
communication modes.