Morgensen MSI350 Series, Руководство пользователя, Страница: 76 / 388

76
Function
code
Name Detailed parameter description
Default
value
P12.07 and P12.08 will be autotuned.
P02.00 Type of motor 1
0: Asynchronous motor
1: Synchronous motor
0
P03.00
Speed loop proportional
gain 1
0–200.0 20.0
P03.01 Speed loop integral time 1 0.000–10.000s 0.200s
P03.02
Switching low point
frequency
0.00Hz–P03.05 5.00Hz
P03.03
Speed loop proportional
gain 2
0–200.0 20.0
P03.04 Speed loop integral time 2 0.000–10.000s 0.200s
P03.05
Switching high point
frequency
P03.02–P00.03 (Max. output frequency) 10.00Hz
P03.06 Speed loop output filter 0–8 (corresponds to 0–2
8
/10ms) 0
P03.07
Electromotion slip
compensation coefficient of
vector control
50%–200% 100%
P03.08
Brake slip compensation
coefficient of vector control
50%–200% 100%
P03.09
Current loop proportional
coefficient P
0–65535 1000
P03.10
Current loop integral
coefficient I
0–65535 1000
P03.11
Torque setup mode
selection
1: Set via keypad (P03.12)
2: Set via AI1 (100% corresponds to three
times of rated motor current)
3: Set via AI2 (the same as above)
4: Set via AI3 (the same as above)
5: Set via pulse frequency HDIA (the same
as above)
6: Set via multi-step torque (the same as
above)
7: Set via MODBUS communication (the
same as above)
8: Set via PROFIBUS/CANopen/DeviceNet
communication (the same as above)
9: Set via Ethernet communication (the same
1