Morgensen MSI350 Series, Руководство пользователя, Страница: 194 / 388

194
P08.05
Deceleration
time 4
Depend
on model
○
P08.06
Running
frequency of
jogging
This function code is used to define the reference
frequency of the inverter during jogging.
Setting range: 0.00Hz–P00.03 (Max. output frequency)
5.00Hz ○
P08.07
Acceleration time
of jogging
Jogging acceleration time is the time needed for the
inverter to accelerate from 0Hz to Max. output
frequency (P00.03).
Jogging deceleration time is the time needed from
decelerating from Max. output frequency (P00.03) to
0Hz.
Setting range: 0.0–3600.0s
Depend
on model
○
P08.08
Deceleration time
of jogging
○
P08.09 Jump frequency 1
When the set frequency is within the range of jump
frequency, the inverter will run at the boundary of jump
frequency.
The inverter can avoid mechanical resonance point by
setting the jump frequency, and three jump frequency
points can be set. If the jump frequency points are set
to 0, this function will be invalid.
Setting range: 0.00Hz–P00.03 (Max. output frequency)
0.00Hz ○
P08.10
Jump frequency
amplitude 1
0.00Hz
○
P08.11 Jump frequency 2 0.00Hz ○
P08.12
Jump frequency
amplitude 2
0.00Hz ○
P08.13 Jump frequency 3 0.00Hz
○
P08.14
Jump frequency
amplitude 3
0.00Hz
○
P08.15
Amplitude of
wobbling
frequency
0.0–100.0% (relative to set frequency) 0.0%
○
P08.16
Amplitude of jump
frequency
0.0–50.0% (relative to amplitude of wobbling
frequency)
0.0%
○
P08.17
Rise time of
wobbling
frequency
0.1–3600.0s 5.0s
○
P08.18
Descend time of
wobbling
frequency
0.1–3600.0s 5.0s
○
P08.19 Switching 0.00–P00.03 (Max. output frequency) 0.00Hz
○