Morgensen MSI350 Series, Руководство пользователя, Страница: 50 / 388

50
3. When extending the keypad cable to install the keypad, M3 screws can be used to fix the
keypad onto the door plate, or optional keypad installation bracket can be used. If you need
install the keypad on another position rather than on the inverter, use a keypad extension cable
with a standard RJ45 crystal head.
4. No.
Name Instruction
1
State
Indicator
(1)
RUN
Running indicator;
LED off – the inverter is stopped;
LED blinking – the inverter is in parameter
autotune
LED on – the inverter is running
2)
TRIP
Fault indicator;
LED on – in fault state
LED off – in normal state
LED blinking – in pre-alarm state
(3)
QUICK/JOG
Short-cut key indicator, which displays
different state under different functions, see
definition of QUICK/JOG key for details
2
Button
area
(4)
Function key
The function of function key varies with the
menu;
The function of function key is displayed in
the footer
(5)
(6)
(7)
Short-cut key
Re-definable. It is defined as JOG function
by default, namely jogging. The function of
short-cut key can be set by the ones of
P07.12, as shown below.
0: No function ;
1: Jogging (linkage indicator (3); logic : NO);
2: Reserved;
3: FWD/REV switch-over (linkage indicator
(3); logic: NC) ;
4: Clear UP/DOWN setting (linkage indicator
(3) logic: NC) ;
5: Coast to stop (linkage indicator (3); logic:
NC) ;
6: Switching running command reference
mode in order (linkage indicator (3); logic:
NC) ;
7: Reserved;
Note: After restoring to default values,